PDA

View Full Version : What Did You Do To Your Jeep Today?



JeepLab
10-05-2014, 05:44 PM
I put JW speaker fog lights into the nemesis bumper.

Rear facing auxiliary lighting.

JeepLab
10-05-2014, 05:48 PM
Here are some shots

1313

1314

1315

Timmy
10-06-2014, 10:51 AM
I added an oil slick canister and rear laser to mine. I might have to add these lights to mine as well as I can see it being helpful to blind the people behind me while I'm deploying the oil slick, so they never see it coming.

Oh yeah, went to the local ORV park to make sure my four-low worked... Yep, worked as expected ;-)

ljvsnyder
10-06-2014, 11:09 AM
I want to see some pics in the dark with these lit up.

FLIPmeOVER
10-13-2014, 09:38 PM
Where is the oil slick install?

bo9roadking
10-14-2014, 12:57 PM
I took off my Poison Spyder Brawler II bumper and moved my spare tire inside.
1333
1334

Yoinkers
10-14-2014, 09:04 PM
Very hot. great look.

Hard to make the back of your truck look different from the rest. We all seem like clones from behind.

Timmy
10-15-2014, 12:49 PM
I took off my Poison Spyder Brawler II bumper and moved my spare tire inside.
1333
1334

Umm... I'm not even sure what to say to these images that I'm staring at...?

http://i.imgur.com/J9dLs.gif

ljvsnyder
10-16-2014, 12:11 PM
is your spare just laying against the rear seat or do you have some type of bracket?

bo9roadking
10-16-2014, 03:49 PM
Umm... I'm not even sure what to say to these images that I'm staring at...?

http://i.imgur.com/J9dLs.gif
Not sure if that is a negative or positive comment. My jeep is not a mall crawler, so there are a few reasons to put the spare inside the jeep. I don't fully utilize my interior storage space, so having the tire occupy that space is no big deal. My jeep is over a foot shorter now and has a better departure angle when I'm going down ledges. I always worried about hitting my spare when I dropped off waterfalls. On approaches up steep ledges, the spare doesn't drag on the ground anymore. I like rock crawling, so moving the tire inside also puts the tire weight over the rear axle for better traction and helps lower the jeep's center of gravity. When the tire was mounted on the bumper, the added weight acted like a lever to push my front end off the ground when the jeep's weight transferred to the rear as I was going up steep hills. The added benefit is that it is now easier to change my tire if I get a flat. I can lift a 120+ pound 40" tire into the back of my jeep and strap it down. I can't lift a 120+ pound tire onto a spare tire mount, spin it to get it aligned with lug nut studs, then hold it in place while I'm trying to get a lug nut on one of the studs by myself. This is the type of stuff that I like doing that had me concerned about damaging my spare tire or the spare tire mount: https://www.facebook.com/photo.php?v=1447734112129137&l=8697102581223238079

https://www.facebook.com/video.php?v=1500359946866553&set=vb.100006776863331&type=3


is your spare just laying against the rear seat or do you have some type of bracket?
I have a1.75" DOM tube welded to 2.25" clamps that are bolted to the factory roll bar. The tire is tied to the bar with the 'Y' ratchet strap. There is about a quarter inch space between the tire and the back of the seat when it is ratcheted down.

Pznivy
10-16-2014, 06:02 PM
Not sure if that is a negative or positive comment.


I have a1.75" DOM tube welded to 2.25" clamps that are bolted to the factory roll bar. The tire is tied to the bar with the 'Y' ratchet strap. There is about a quarter inch space between the tire and the back of the seat when it is ratcheted down.

Do a lap around that jeep and show us some pics!

bo9roadking
10-17-2014, 06:42 AM
I posted a couple of pics of my Magnuson install here: http://jeeplab.com/showthread.php?180-Magnuson-Supercharger-Clean-Up&p=3279&viewfull=1#post3279

I have other pics, but none with the recent changes made to my jeep. I'm going wheeling this weekend, so I may get some more up to date pics.

gbaumann
10-18-2014, 07:33 PM
I changed my factory Alpine soundbar speakers to Infinity Kappa 6.5 inch two way speakers. Tomorrow I'm going to change the dash setup to Infinity Kappa 6.5 inch component speakers. Then on to the subwoofer. I'll post pics soon.

Yoinkers
10-22-2014, 10:19 PM
oil change. tire rotation. Went with the 5 tire change. I dont think ill be keeping the duratracs after this round of tires.

Timmy
10-23-2014, 12:28 AM
oil change. tire rotation. Went with the 5 tire change. I dont think ill be keeping the duratracs after this round of tires.

Good for you! I can't believe the number of people that purchase 5 tires and choose not to rotate in the 5th. Man, your tires would last 20% longer if you did, and the real kicker... how many times have you blown a tire, put the spare on and then brought your blown tire in to be patched only to find the puncture was in the sidewall and can't be repaired. THEN, the wonderful news "you know, you can't drive with one brand new tire on one side of the vehicle only, you have to purchase a new spare and ANOTHER new tire to put on the other side so your tires rotate at the same speed." And then you end up purchasing two new tires. That's a total of 7 tires versus 6, and you lost out on an extra 20% tread life. Dumb, dumb, dumb. To all you Jeepers out there, for the love of everything good in this world, rotate in your spare. Unfortunately for me, the previous owner didn't rotate in the spare and now I'm too far down the road of tire wear to rotate it in because the overall diameter of the tire is too big compared to the other four.

WhiteRavenRR
10-25-2014, 10:40 AM
Removed the OEM Tire Carrier and relocated the license plate to the center. I used a black sheet of plastic and used the factory carrier as a template. I used my wiring from my LED and relocated the light to light the tag up at night. I then used a scrap piece of plastic to cover the original license hole.

I then used door trim molding around the center piece to clean it up even more. My light is on a switch for now.

This is just a temporary mod until I purchase an aftermarket tire carrier. I was hearing a loud rattle from the area of the tailgate/ tire carrier but I couldn't pinpoint where it was coming from. To be on the safe side I decided to just remove it for now. My center tailgate vent has pretty much deteriorated and the flaps were missing. I will also make an upside down U-shaped seal that is open on the bottom to still allow the vent to function as intended and still keep out the rain.

I can throw the spare in the back as soon as I find some way to bolt it down. The good thing is that I can use my rear cargo cover and it hides the spare from view. Good thing the tires are Duratracs. I don't think a true 35 would actually fit while laying down.

I also used Nite Shadez to blackout the rear tail light lenses.

1352

On a side note, if you look closely at the pic and view just below the tailgate on the right side (straight below the right tire bumper) you can see a discolored spot on the paint. This appears to be from the factory exhaust that has caused this over time. My Jeep is an 2007. Has anyone else noticed this on your Jeeps? I will probably be going with a Magnaflow Cat-Back system with a rear axle dump in the future. Luckily This spot will not be seen so easily with a new rear bumper.

JeepLab
10-25-2014, 03:31 PM
Removed the OEM Tire Carrier and relocated the license plate to the center. I used a black sheet of plastic and used the factory carrier as a template. I used my wiring from my LED and relocated the light to light the tag up at night. I then used a scrap piece of plastic to cover the original license hole.

I then used door trim molding around the center piece to clean it up even more. My light is on a switch for now.

This is just a temporary mod until I purchase an aftermarket tire carrier. I was hearing a loud rattle from the area of the tailgate/ tire carrier but I couldn't pinpoint where it was coming from. To be on the safe side I decided to just remove it for now. My center tailgate vent has pretty much deteriorated and the flaps were missing. I will also make an upside down U-shaped seal that is open on the bottom to still allow the vent to function as intended and still keep out the rain.

I can throw the spare in the back as soon as I find some way to bolt it down. The good thing is that I can use my rear cargo cover and it hides the spare from view. Good thing the tires are Duratracs. I don't think a true 35 would actually fit while laying down.

I also used Nite Shadez to blackout the rear tail light lenses.

1352

On a side note, if you look closely at the pic and view just below the tailgate on the right side (straight below the right tire bumper) you can see a discolored spot on the paint. This appears to be from the factory exhaust that has caused this over time. My Jeep is an 2007. Has anyone else noticed this on your Jeeps? I will probably be going with a Magnaflow Cat-Back system with a rear axle dump in the future. Luckily This spot will not be seen so easily with a new rear bumper.

well done. I suggest JCR dagger for the new rear bumper. Let us know what you end up with.

JeepLab
10-25-2014, 03:42 PM
DECAL STRIP!

gettin ready for next year!

1353

WhiteRavenRR
10-26-2014, 12:04 AM
JCR is the bumper I am looking at. I like the one that requires the rear crossmember to be cut off so it sits further under the tub. I also like the Poison Spyder BFH rear bumper but there is no receiver hitch. I'm seriously considering the EVO Tire Carrier.

WhiteRavenRR
10-26-2014, 12:06 AM
DECAL STRIP!

gettin ready for next year!

1353

You just put those on a few months ago!

Send me some black JeepLab ones this way when you get the chance. Let me know what they cost.

JeepLab
10-26-2014, 09:58 AM
You just put those on a few months ago!

Send me some black JeepLab ones this way when you get the chance. Let me know what they cost.

Yes, I switch up the decals when I switch up gear. PM truck wheels coming, and JW speaker. New BFG logo.

Every time i strip the decals, I think that the hood needs some black paint on it. I might pull the trigger on that soon.

JeepLab
10-26-2014, 11:23 AM
This decal order will cover the extras for you guys. Shirts are coming too.