PDA

View Full Version : Dremel



JeepLab
03-12-2014, 03:22 PM
working in tight spaces? Look for the dremel.

We have a few of these. 8220 is our rotary tool, and we also have the Saw Max.

Dremels are normally around $100 per tool But they are tough little machines.

We cut 1/4 steel with the saw max. I'll have to find the picture. It was impressive.

JeepLab
03-12-2014, 03:25 PM
Here are some pics of our dremels.

486

487

JeepLab
03-12-2014, 03:32 PM
Here's a shot of the 8220 in action. We are modding the fuel line for the Magnuson Supercharger

489

And cutting the stud in the rear of the engine bay

488

Snarf77
03-13-2014, 09:04 PM
I used a dremel and a stone grinding bit to reshape several of the holes I drilled for rivet nuts in my body. The instructions called for a 17/32 hole but I drilled a 1/2 inch and touched it up with the dremel for a perfect fit.

My dremel is one of my most valuable tools and stays out on the workbench ready for action.