Close

Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1

    Poison Spyder Bombshell Diff Covers

    Hey Everyone.

    Got some Poison Spyder Diff Covers. Figured you'd want pics.

    I might even bash one with a hammer. Im pretty sure it can take a good shot. They are thick and heavy.

    Here's a shot of them in bare steel. We painted them a few times, pics coming.

    We started out with the dremel, with a wire wheel to scuff them up. Used the dremel 8220 cordless rotary tool. I had the Saw Max there too, so its in the picture, I cut 1/4 inch steel with the saw max before. They are tough little machines.

    Click image for larger version. 

Name:	Poison Spyder Bombshell 1.jpg 
Views:	138 
Size:	90.1 KB 
ID:	42

  2. #2

    Primed

    Here they are with dark primer.

    Click image for larger version. 

Name:	Poison Spyder Bombshell 4.jpg 
Views:	126 
Size:	87.7 KB 
ID:	43

  3. #3

    Then Flat Black

    We went with Flat black after the primer. I wanted to do the flat black as the background and cut out the spider and have it be the hammered finish.

    It would have looked super cool, but I just couldnt get the painters tape to work on the paint. I could get it on there, but when I tried to cut out the spider, I would take the base paint off. It was a nightmare.

    Regardless, I plan to bash them into stuff, so im going to need to be able to just respray them later. So no big deal.Click image for larger version. 

Name:	poiosn spyder bombshell 5.jpg 
Views:	111 
Size:	85.4 KB 
ID:	44

  4. #4

    Hammered Finish

    Here's how they came out.

    I wasnt blown away. The spray can's cap was far more interesting then the diff cover, final finish. If I had it to do over, I would have stuck with the matte finish, or gone gloss.

    Click image for larger version. 

Name:	Poison Spyder bombshell 6.jpg 
Views:	128 
Size:	95.0 KB 
ID:	45

  5. #5

    Installed

    Here it is installed.

    We were installing the Artec Axle Armor kit, so this cover wet on last. Here's how it looked. The Axle was just sprayed with glossy black paint.

    Click image for larger version. 

Name:	Poison Spyder Bombshell on Artec axle.jpg 
Views:	114 
Size:	83.5 KB 
ID:	46

    Click image for larger version. 

Name:	Poison Spyder diff cover on axle.jpg 
Views:	137 
Size:	80.9 KB 
ID:	47
    Last edited by JeepLab; 02-16-2014 at 08:27 PM. Reason: spaced out the pics

  6. #6

    Sledge Hammer Testing. Yes that's right.

    The stock diff cover held up better than expected. After seeing the punishment it took, i feel less that changing them immediatly is less neccessary than I thought.

    The stock cover however didnt survive the testing.

    The Poison spyder bombshell did however. This exact diff cover will be installed soon.

    Once you install one of these your gears are safe as can be.

    Last edited by JeepLab; 02-16-2014 at 08:49 PM.

  7. #7
    I could watch those diff covers get hit with hammers all day.

    the most eye opening thing about that video is that the stock diff cover held up so well.

    Makes you think twice before dumping 200 bucks on diff covers.

    Has anyone out there damaged the stock diff covers to a point that they were stranded on the trail?

  8. #8
    Quote Originally Posted by Rexx19 View Post
    I could watch those diff covers get hit with hammers all day.

    the most eye opening thing about that video is that the stock diff cover held up so well.

    Makes you think twice before dumping 200 bucks on diff covers.

    Has anyone out there damaged the stock diff covers to a point that they were stranded on the trail?
    I felt the same way, Moved Diff Covers to the back of the priority list when I saw how the stockers hung in there. I wont hit anything hard off road.

    Crawling over stuff will not generate the same pounds per square inch as that sledge hammer does. How many times does he hit the thing?

  9. #9
    Quote Originally Posted by Rexx19 View Post
    I could watch those diff covers get hit with hammers all day.

    the most eye opening thing about that video is that the stock diff cover held up so well.

    Makes you think twice before dumping 200 bucks on diff covers.

    Has anyone out there damaged the stock diff covers to a point that they were stranded on the trail?
    This is a good question, We have never seen damaged diff covers ending someone's day offroad.

    and this video made us feel the same about the stock diff cover. Sweet Pea, our magnuson SC truck still has stock diff covers installed. And we will wheel her like that.

  10. #10
    Here's the aftermath.

    the Poison Spyder, was fit to install. And was installed later. The stock dif cover was not so lucky.

    Although, the stock dif cover did hold up FAR better than expected. We hit them a lot with the sledge hammer.

    Click image for larger version. 

Name:	P1000488.jpg 
Views:	101 
Size:	95.3 KB 
ID:	303

    Click image for larger version. 

Name:	P1000493.jpg 
Views:	98 
Size:	93.0 KB 
ID:	304

    Click image for larger version. 

Name:	P1000489.jpg 
Views:	99 
Size:	96.3 KB 
ID:	305

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •