Close

Results 1 to 10 of 12

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    I started by removing all the Krawler joints and the flex joint bushings. I used a 5/8" socket to push out the center sleeve.:
    Attachment 1032

    Attachment 1033

    Once the sleeve is out, there are two bushings that need to come out from each side:
    Attachment 1034

    Attachment 1035

    I also used a parts cleaner with a very mild cleaning agent to clean all the grease and crud that were on the Krawler joints themselves.:
    Attachment 1037
    Last edited by WhiteRavenRR; 08-28-2014 at 03:50 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •