RIPP vs. Magnuson...SuperCharger Shootout!

[Timmy]

JeepLab (or anyone)

I had read another forum a post from the owner of RIPP (this was posted May of 2012) that he had a program where anyone could get a RIPP SC professionally installed for $250 (not the cost of the SC, just the install.) Have you ever heard of this? I'm guessing posted in 2012 meant 3.8L engine. Any chance this is true for a 3.6L engine?

http://www.jkowners.com/forum/showthread.php?t=74375

"Ours bolts on in a few hours, adds 100 more real wheel HP and 90 more ft/lbs of torque - (real world numbers at the wheels through 35-37" tires) and 2-4more MPG (as reported though many end users). Ours systems have been as low as 24 below Zero in Alaska/Canada and in the high heat desert 130 + degrees jumping dunes...

Besides - we have a New low price $4899.95 and now ANY AUTHORIZED DEALER WILL install our system for just $250.00...

RIPP"

[Deola]

JeepLab (or anyone)

I had read another forum a post from the owner of RIPP (this was posted May of 2012) that he had a program where anyone could get a RIPP SC professionally installed for $250 (not the cost of the SC, just the install.) Have you ever heard of this? I'm guessing posted in 2012 meant 3.8L engine. Any chance this is true for a 3.6L engine?

http://www.jkowners.com/forum/showthread.php?t=74375

"Ours bolts on in a few hours, adds 100 more real wheel HP and 90 more ft/lbs of torque - (real world numbers at the wheels through 35-37" tires) and 2-4more MPG (as reported though many end users). Ours systems have been as low as 24 below Zero in Alaska/Canada and in the high heat desert 130 + degrees jumping dunes...

Besides - we have a New low price $4899.95 and now ANY AUTHORIZED DEALER WILL install our system for just $250.00...

RIPP"

The authorized installer price for my Dads 2013 was $1,000. 00, and they made several errors, then even put a bolt through the ac compressor. Ripp said not to use them again, not sure if they are on their list still. ORI in Winchester VA

[JeepLab]

JeepLab (or anyone)

I had read another forum a post from the owner of RIPP (this was posted May of 2012) that he had a program where anyone could get a RIPP SC professionally installed for $250 (not the cost of the SC, just the install.) Have you ever heard of this? I'm guessing posted in 2012 meant 3.8L engine. Any chance this is true for a 3.6L engine?

http://www.jkowners.com/forum/showthread.php?t=74375

"Ours bolts on in a few hours, adds 100 more real wheel HP and 90 more ft/lbs of torque - (real world numbers at the wheels through 35-37" tires) and 2-4more MPG (as reported though many end users). Ours systems have been as low as 24 below Zero in Alaska/Canada and in the high heat desert 130 + degrees jumping dunes...

Besides - we have a New low price $4899.95 and now ANY AUTHORIZED DEALER WILL install our system for just $250.00...

RIPP"

ive never heard of it, but it would be a good way to sell kits. Lowers the total cost AND you know its in right. It could be the difference in buying an SC at all.

[Yoinkers]

That could be the nudge I need. Id make the looooong trip to RIPP if it was an option.

[2me]

Subscribed
I still like the looks of Magnuson's low end power range.

[Yoinkers]

Subscribed
I still like the looks of Magnuson's low end power range.

Im with this guy^^ but overall, the mag's power band is the sexiest, but these are "Glory" dyno passes, Im sure JL uses cold components, and lets everything cool before running again. What I'm concerned with is the heat soak that Im sure the mag suffers from.

Dyno it once, and then hot lap it, then dyno it again, and the hot numbers will be significantly different from the cold ones. I think the RIPP style suffers from it less.

That would be a good test. Hot superchargers. who loses more power?

[Timmy]

A buddy of mine just (last night) took this pic of a Jeep in Kalispell, MT. Looks to me like a RIPP SC in it? Nicely done, whoever you are... You have a butt-tone of mods on that sucker from what I can see. (The embedded photo here makes it hard to see the inner-cooler in the front, not sure if there is a way to make the photo bigger?)

[Yoinkers]

photo boost!

[kevlar21]

There is a new tune being worked on, but it is not quite ready for release yet. Once my tuner gets it finished, we will work with the sales department to try and get it out to everyone, however, I don’t have an exact date on when it will be released.

Simon Gale, Lead Tech
Magnuson Products LLC.

hi, first post...

first of all thanks for this comparison! its really helping me in deciding on which one to get. im leaning toward the magnuson because of the torque curve. the only thing that has kept me from pulling the trigger is that people are saying that the tune has some issues, such as surging. anyways, i contacted magnuson about the issues (on about 7/11/14) and they said that they will have the tune perfected soon, but they didnt give me an exact date, or where to look for it to be posted. so just wonderin if anyone here or at magnuson has any info on the newest tune or when the surging issues are solved, please post here!

[kevlar21]

also, jeeplab, do you have any plans to install the 8 psi pulley? if so please post reviews or dyno or whatever!