Close

Results 1 to 4 of 4

Thread: Dremel

  1. #1

    Dremel

    working in tight spaces? Look for the dremel.

    We have a few of these. 8220 is our rotary tool, and we also have the Saw Max.

    Dremels are normally around $100 per tool But they are tough little machines.

    We cut 1/4 steel with the saw max. I'll have to find the picture. It was impressive.

  2. #2
    Here are some pics of our dremels.

    Click image for larger version. 

Name:	JeepLabdremel1.jpg 
Views:	18 
Size:	89.9 KB 
ID:	486

    Click image for larger version. 

Name:	JeepLabDremel2.jpg 
Views:	18 
Size:	81.0 KB 
ID:	487

  3. #3
    Here's a shot of the 8220 in action. We are modding the fuel line for the Magnuson Supercharger

    Click image for larger version. 

Name:	P1060966.jpg 
Views:	17 
Size:	79.5 KB 
ID:	489

    And cutting the stud in the rear of the engine bay

    Click image for larger version. 

Name:	JeepLab Magnsuon Cut Stud.jpg 
Views:	18 
Size:	72.2 KB 
ID:	488

  4. #4
    Senior Member
    Join Date
    Feb 2014
    Location
    MD/PA line
    Posts
    425
    I used a dremel and a stone grinding bit to reshape several of the holes I drilled for rivet nuts in my body. The instructions called for a 17/32 hole but I drilled a 1/2 inch and touched it up with the dremel for a perfect fit.

    My dremel is one of my most valuable tools and stays out on the workbench ready for action.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •