-
Senior Member
Dremel
working in tight spaces? Look for the dremel.
We have a few of these. 8220 is our rotary tool, and we also have the Saw Max.
Dremels are normally around $100 per tool But they are tough little machines.
We cut 1/4 steel with the saw max. I'll have to find the picture. It was impressive.
-
Senior Member
Here are some pics of our dremels.
![Click image for larger version.
Name: JeepLabdremel1.jpg
Views: 18
Size: 89.9 KB
ID: 486](http://jeeplab.com/attachment.php?s=12d1c5a263adb361b9b71a6ea2ce575f&attachmentid=486&d=1406934825&thumb=1)
-
Senior Member
Here's a shot of the 8220 in action. We are modding the fuel line for the Magnuson Supercharger
![Click image for larger version.
Name: P1060966.jpg
Views: 17
Size: 79.5 KB
ID: 489](http://jeeplab.com/attachment.php?s=12d1c5a263adb361b9b71a6ea2ce575f&attachmentid=489&d=1406934825&thumb=1)
And cutting the stud in the rear of the engine bay
-
I used a dremel and a stone grinding bit to reshape several of the holes I drilled for rivet nuts in my body. The instructions called for a 17/32 hole but I drilled a 1/2 inch and touched it up with the dremel for a perfect fit.
My dremel is one of my most valuable tools and stays out on the workbench ready for action.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Connect With Us