Rexx19 they are from my phone but only some worked without an error and other problem is i can only post one at a time. that takes forever when u have like 20 to post.
only major problem i had was getting the old joints out of the control arms. but with a large monkey wrench and a large open end wrench on the jam nut i was able to break them free and get them out.
Yes they are very tight. I had to use a large crescent wrench and about a 15lb sledge plus my neighbors help. We placed the arms in a vise and almost broke the table it was attached to by the time we broke all 8 arms loose.
Connect With Us