Close

Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 47
  1. #21
    Quote Originally Posted by Timmy View Post
    I absolutely love how KaiserBill goes back and edits his posts after people have replied and quoted them, sometimes changing the post entirely. Now that is a sign of a person secure in who they are.

    What no derpy-derby? I was just taking your advice and making the topic easily understood by people with lesser cognitive powers. I thought it was self evident that I was speaking of all diesels; including those that Jeep themselves plan on putting into the Cherokee series vehicles from the factory to aftermarket factory models for the Wrangler. You seemed to think this was some sort of attack on Jeeps. And I merely felt it was necessary to clear up my intent. I'm sorry that you don't have the same love and respect for the diesel engine and its theoretical and practical achievements.

    As for diesels that could fit in the modern Jeep JK and JKU series trucks-- obviously the older B-Series BT and ISB 3.9L engines and the new ISF series 2.8 and 3.8 L series engines. You might also be able to stick under the hood older DD 4-53T's and DD 3-71T's--- a fun option but it would require more effort but might be possible with crafty plumbing... The MAN D0834 Engine an inline 4 with displacement of 4.6L is rather compact and very nice-- plus it would once again bring the Jeep back into the fold of German Engineering--and in the house that Rudolf Diesel himself put on the map!!!! So, that has a nice symmetry to it.

    As for the Wrangler V8 502 with fully computerized suspension-- you have to ask yourself if it is so capable why then did vehicle drive on such tame terrain? Not to mention such slow speeds.... Both of those facts make me ask is the suspension system up to the rigors of true off-road driving? If it stands up to hard use then I'm very impressed-- however, my feeling is that it is probably a very costly and temperamental system that is complex and failure prone.

    While I couldn't find a video of the M35A2's tests for the US-- I did find the Russian Ural 4320 series video-- it has very similar capabilities.




    I still find it amusing that after I soundly proved that Diesel vehicles can be fast and effective in motor racing and drag racing you seemed to have no comment? Are you saying that Peugeot's 20 wins with the HD908FAP vehicle is not impressive? Or Audi's dominance at Le Mans for nearly a decade and half with diesel cars is not also impressive? Or is it if it isn't found in our home grown arena of achievement it is meaningless? I would hope you would be more open minded about the possibilities of the diesel cycle! I think we should celebrate the birthday of Rudolf Diesel like that of Jesus Christ after all who's life is not affected by the diesel goodness in some positive fashion???

  2. #22
    Quote Originally Posted by ljvsnyder View Post
    i will bite, if i had a choice for a diesel wrangler that is what would be in mine. why better mileage and more low end torque. sure my 6 cylinder cummins was capable of more than 1000 whp, but it weighed close to 4000lbs. not practicle in our smaller wrangler. now cymmins new isb 4 cylinder with that is anticipated in the nissan frontier would be agood option for a next gen wrangler. however ford is proving tune ability with the ecoboost similar to diesels. so gas or diesel choose your poison.
    The 3.8L ISF will fit as well and it could easily be tuned up to the same levels as the older B-Series 3.9L engines can. Plus, it comes with the new Holsten Variable Geometry turbo which has some cool potential for tuning.

    I've never seen a Cummins N-Series block in the 855cid range weighing in more than 2800lbs. What sort of Cummins are you talking about the larger KT16 or KT19 series engines? Now DD's were always far heavier. However, the Cummins of 3.8 to 3.9L sizes tend to be less than 1500lbs fully loaded and if you tune one to 700hp with 1000ft-lbs of torque at the rear wheels the added weight isn't much of an issue for the most part.

  3. #23


    Shouldn't you have used this video to prove your point?

  4. #24


    This is at the rear wheels 434hp and 771ft-lbs... Imagine that in your Jeep and this a very mild tune. You could easily turn it up to 800hp at the rear wheels. But let's say you keep the engine at about 440-460hp at the rear wheels that is about 100 to 115hp more hp and if the torque is 790ft-lbs to 820ft-lbs is like 300-400ft-lbs extra torque. So clearly this type of engine conversion would be awesome both on the road and on the trail.

  5. #25
    You make it sound like it's as simple as adjusting some screws and suddenly you have a 400+, or even 800+ hp 4BT.

    I did some browsing around on a couple 4BT forums, and the common relatively easy, affordable mods get you into the low 200 hp range without opening up the engine. Beyond that seems to start requiring serious engine mods (pistons, rods, machining heads, valve springs, aftermarket studs, crankcase bracing, bigger turbo, twin sequential turbos, etc., etc.).

    I've also noticed that the diesels with huge power at the drag strip need to brake-boost for about 5-10 seconds to pre-spool the turbo before fully staging to begin the race. They do the same thing on the dyno too. That leads me to believe that there would be some serious turbo lag during daily driving if you wanted to tap into that big power.

    Yes, a 4BT can make some huge power. But it takes quite a bit of money/work, especially if you want good reliable power. The same can be said for many engines. There's nothing magically secret about diesel for getting more power.

    The Pentastar could likely make some similarly huge power if it was modified to the extent of these huge power small diesels. The stock pentastar already makes quite a bit more power than a stock 4BT. Bolt-on forced induction puts the Pentastar into the power range that the 4BT requires being rebuilt internally to support.

    What the huge power modded diesel gives you though is insane low rpm torque. I know some Jeep people think low rpm torque is all the rage, but I'm pretty sure it would be safe to say that 800+ ft-lbs that requires loading up the engine to spool up the turbo to get there... would just be absolute complete overkill for off road driving in a Wrangler. That kind of torque is what you use for hauling *very* heavy loads. I know it's hard for you to remember, but this is a Wrangler forum. Wrangler's don't weigh as much as your deuce, so they don't need ridiculous amounts of low-end torque just to move around acceptably.

    Final point: if the 4BT is so easy to turn up to 600, 700, 800+ hp as a reliable and good daily driver, and would be amazing in a Wrangler, then why isn't Bruiser doing it? Why does Bruiser only talk about being able to "turn it all the way up" to the 250-300 hp range? Maybe you need to call up Bruiser and let them in on your secrets to more power!
    Last edited by UselessPickles; 04-11-2015 at 11:55 PM.

  6. #26
    Quote Originally Posted by UselessPickles View Post
    You make it sound like it's as simple as adjusting some screws and suddenly you have a 400+, or even 800+ hp 4BT.

    I did some browsing around on a couple 4BT forums, and the common relatively easy, affordable mods get you into the low 200 hp range without opening up the engine. Beyond that seems to start requiring serious engine mods (pistons, rods, machining heads, valve springs, aftermarket studs, crankcase bracing, bigger turbo, twin sequential turbos, etc., etc.).

    I've also noticed that the diesels with huge power at the drag strip need to brake-boost for about 5-10 seconds to pre-spool the turbo before fully staging to begin the race. They do the same thing on the dyno too. That leads me to believe that there would be some serious turbo lag during daily driving if you wanted to tap into that big power.

    Yes, a 4BT can make some huge power. But it takes quite a bit of money/work, especially if you want good reliable power. The same can be said for many engines. There's nothing magically secret about diesel for getting more power.

    The Pentastar could likely make some similarly huge power if it was modified to the extent of these huge power small diesels. The stock pentastar already makes quite a bit more power than a stock 4BT. Bolt-on forced induction puts the Pentastar into the power range that the 4BT requires being rebuilt internally to support.

    What the huge power modded diesel gives you though is insane low rpm torque. I know some Jeep people think low rpm torque is all the rage, but I'm pretty sure it would be safe to say that 800+ ft-lbs that requires loading up the engine to spool up the turbo to get there... would just be absolute complete overkill for off road driving in a Wrangler. That kind of torque is what you use for hauling *very* heavy loads. I know it's hard for you to remember, but this is a Wrangler forum. Wrangler's don't weigh as much as your deuce, so they don't need ridiculous amounts of low-end torque just to move around acceptably.

    Final point: if the 4BT is so easy to turn up to 600, 700, 800+ hp as a reliable and good daily driver, and would be amazing in a Wrangler, then why isn't Bruiser doing it? Why does Bruiser only talk about being able to "turn it all the way up" to the 250-300 hp range? Maybe you need to call up Bruiser and let them in on your secrets to more power!
    Simple is relative. You don't make 800hp or even 600hp at the crank shaft without some internal modifications:

    1) Reduce Compression ratio from I believe it is 17:1 possibly 18:1 to 13-14.5:1 ratio (it will be a little harder to start, but still doable.). New pistons about $1000.00 maybe less depending type used.

    2) Blue Print and Port The Engine That has to be done. Depending on how well built your engine is from the factory will determine how much this will set you back but it should be under $3K if you can do most of the work yourself.

    3) Fuel injector pump have it rebuilt so you can get at least 800PSI to the injectors they will do the rest of the work for you. You want high volume and high pressure. So you need to have your injectors blue printed-- depending on the number and specs you have probably set you back with the injector pump another $2000-$2500

    4) Turbos-- You start off with the first stage using the stock 4BT turbo then you put on either a Cummins 8.3 turbo or maybe one from L10 enigne either one will probably be more than enough to get you to the magic boost number of 200+ PSI!!!! Used pull out about $500-$1000-- rebuild kit runs about $250 to $500 depending on requirements.

    5) Intercooler-- Probably air to air you can get one for about $800- $1000.

    6) Water-Methanol System about $950.00

    7) Wrap and insult the exhausts and turbos for each stage as well as the intakes. $500.00


    How do you make the power: Compound (Two Stage) Turbo Charging. You use the smaller 4BT stock unit to as the primary turbo with a by pass value that is boost operated-- it reaches say 24PSI Manifold pressure bam it closes and spools up the bigger C8.3 unit or L10 Unit that then pushes up to the 60-200psi manifold pressure zone.
    Again the price of the final product all depends on your ability to find good prices on things and perform a majority of the work yourself. Otherwise the price goes way up. But, to me this is easy.





    This how Borg-Warner does it. A home-built setup will have more tubing and so on but it will work out the same way. Massive HP!!!!

    Why doesn't Bruiser do it? Simple reliability always suffers with massive hp an torque. They want customers that want novelty but aren't exactly people who fix things on their own. So they keep the HP low and the Torque lower and this makes for greater reliability in all aspects of the vehicle.
    Last edited by KaiserBill; 04-12-2015 at 06:25 PM.

  7. #27
    Thanks. I think you've just proven my point. And that's all on top of a $21k conversion. And there's a lot of assumptions of "do all the work yourself" (bolt-on kits are one thing, removing and rebuilding an engine is on a whole different level of skills/tools necessary), and assumptions that you actually know what the hell you're doing with matching all the right components and settings up to support the big power (there isn't a simple complete kit for this). More realistically, you're going to need to work with a performance shop that has experience in modding the 4BT, and prices for various portions of the process will skyrocket. And in the end, reliability is a concern.

    For about the same amount of $$$, you could do a 6.1 or 6.4 hemi conversion (pay someone else to do it, that is), add a bolt-on supercharger *kit* from a reputable manufacturer, no engine mods necessary, be in the same ballpark of power output, and have an engine that can be diagnosed/serviced by any Chrysler dealer. Plus the Hemi sounds much better. The 4BT sounds like a school bus or garbage truck. Not impressive :-p
    Last edited by UselessPickles; 04-12-2015 at 07:41 PM.

  8. #28
    Quote Originally Posted by UselessPickles View Post
    Thanks. I think you've just proven my point. And that's all on top of a $21k conversion. And there's a lot of assumptions of "do all the work yourself" (bolt-on kits are one thing, removing and rebuilding an engine is on a whole different level of skills/tools necessary), and assumptions that you actually know what the hell your doing with matching all the right components and settings up to support the big power (there isn't a simple complete kit for this). More realistically, you're going to need to work with a performance shop that has experience in modding the 4BT, and prices for various portions of the process will skyrocket. And in the end, reliability is a concern.

    For about the same amount of $$$, you could do a 6.1 or 6.4 hemi conversion (pay someone else to do it, that is), add a bolt-on supercharger *kit* from a reputable manufacturer, no engine mods necessary, be in the same ballpark of power output, and have an engine that can be diagnosed/serviced by any Chrysler dealer. Plus the Hemi sounds much better. The 4BT sounds like a school bus or garbage truck. Not impressive :-p
    I said it was simple-- I didn't say it was a bolt on kit- i.e. idiot proof... And yes it does require more skills and understanding of the engines than bolting on a turbo kit. However, the rewards are so much greater to he who knows the secrets of the dieselly goodness!!!! As for reliability anytime you add a turbo or change the the chip-set in engine you reduce potential reliability. When you put the Prodigy kit on your Jeep reliability was compromised. This would be potentially more likely to have a failure. But, odds are a 4BT operating under its normal rpm with about 80PSI of manifold pressure would have a nice long life.

    Myself, I would put a 4-53T Detroit Diesel in the Jeep with Compound turbo unit and I'd tweak the RPM to 2800-- which would add a little more complexity and then I would throw out the stock transmission and put in a Eaton Fuller 6spd model (maybe even an older Spicer 5+4 unit if I could it under it) and put in a heavy duty divorced Transfer Case and swap the axles out for U1400 series Portal Axles...


    http://www.powerlinecomponents.com/l...automotive.pdf



    My theoretical build would sound like Satan Himself Pulling Up To Your Doorstep For Your Soul! The best part is I could make it roast any 6.4Hemi build from AEV on the Dyno pretty much any engine that isn't 100k in price playing with pump gas would be a loser to this engine on the dyno. Not to mention being stroke the torque curve would be nearly flat. So, it would be epically overpowered on or off the road.
    Last edited by KaiserBill; 04-12-2015 at 09:10 PM.

  9. #29
    Senior Member Timmy's Avatar
    Join Date
    Apr 2014
    Location
    Spokane, WA
    Posts
    288
    Quote Originally Posted by KaiserBill View Post
    Myself, I would put a 4-53T Detroit Diesel in the Jeep with Compound turbo unit and I'd tweak the RPM to 2800
    Then why don't you put the 4-53T Diesel in your Jeep? Go for it, then write up a posting with step-by-step so we can all learn how to put one in a Jeep. Toss it on the dyno when you're done and share your results.
    2014 Jeep JKU Sahara, Manual - /OlllllllO\ - 4" Metal Cloak lift, 37" Toyo Open Country's on 20" XD Bully Rims, 4.56 Yukon gears, Mopar High Top Fenders, ARB Front Bull Bar Bumper, ARB Rear Bumper, Teraflex HD Tire Carrier, Teraflex Tire Carrier Accessory Mount, Twin Rotopax mount, Hi-Lift Jack mounted on front bumper, Reverse LED work lights, Warn 9.5ti winch, Synergy Drag Link, Trackbar Relocation Bracket, AMP Power Steps, JK1001 Radio, SpiderShade.

  10. #30
    The full secret is finally revealed! If you have all the skills, knowledge and tools necessary to completely rebuild/tune an engine for big power, then you can completely rebuild/tune an engine and get big power! No Way!

    Really, the best-kept secret to more power is not Deisel, but the 2.0L Ecotec engine. People are getting up to 1500 hp out of them! Out of only a 2.0 inline 4 gasoline engine!







    So there you have it. Obviously, the best path to more power is a 2.0 Ecotec engine, because it is proven that you can heavily modify them to make 1500 hp. Who's going to be the first to swap one into their Jeep and mod it for big power? It's easy, as long as you have the money, time, knowledge, skills and tools required to do a custom rebuild and tune of an engine!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •